Anker eufy Security T8420 Guide De Démarrage Rapide page 3

Safety Instructions
1. Shut off power at the fuse or circuit breaker before installing.
2. Do not install the device near flammable surfaces.
3. Must have a licensed electrician install the Floodlight Camera.
4. Do not use the device in environments where the temperature is too
high or too low, avoid exposing the device to direct sunshine or very wet
environments.
5. The suitable temperature for the product and accessories is -20°C to 50°C.
What's in the Box
Floodlight Camera Junction Box
(T8420)
Central Screw Central Screw Cap
01 EN
Getting Started
1. Shut the power off at the breaker in your house. Switch on/off the lights
2. Determine the area you want to be lit and camera coverage is required. Install
Installation Hook
Plate Screws
to make sure the electricity in your house is properly shut off.
your Floodlight Camera on the front wall or on a side wall of your house. To
get optimal detection and light coverage for the floodlight and camera, install
it on a side wall if possible. *
* The motion sensor is more sensitive to movements across the camera field of view than
movements towards or away from the sensor. We highly recommend you install the floodlight
camera on the side wall.
EN 02