Batavia BT-CLB007 Mode D'emploi page 11

operated in lower temperatures, the battery output
will be reduced.
Note: A fully charged battery will loose about 2%
of its charge per month during storage.
Before use
The battery must be charged before using it for the
first time.
Removing the battery from the machine
Push the battery release button (2) and pull
•
the battery (1) out of the machine.
WARNING: Do not try to remove the battery with-
out pressing the battery release button. The drill or
battery could be damaged.
Inserting the battery into the machine
Ensure that the exterior of the battery is clean and
dry before connecting to the charger or machine.
Insert the battery (1) into the machine, push
•
the battery further forward until it clicks into
place.
Note: Make sure the battery and machine are
lined up correctly. If the battery does not slide onto
the machine easily, don't force it. Instead, remove
the battery; check the top of battery and the
English
11