Publicité
Les langues disponibles
Les langues disponibles
Filling The Rinse Aid Reservoir
Remove the rinse
1
reservoir cap by lifting up
the handle .
Close the cap after all.
3
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the
dishwasher is designed to adjust the consumption by user. Follow the
below steps.
1. Close the door, switch on the appliance.
2. Within 60 seconds after step 1, press the Self-cleaning button
more than 5 seconds, and then press the Delay + Button to enter
the set model, the rinse aid indication blinks as 1Hz frequency.
3. Press the Self-cleaning button to select the proper set according
to your using habits, the sets will change in the following
sequence: d3->d4->d5->d1->d2->d3, The higher the number, the
more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or Press the Power button to end
the setup model..
Pour the rinse aid into the
2
dispenser, being careful
not to overfill.
39
V.1
Publicité
