Publicité
Les langues disponibles
Les langues disponibles
kNOWING YOUR HEDGE TRIMMER
9
1. Blade
2. Guard
3. Front Handle
4. Front Switch
5. Lock-Off Switch
ASSEMBLY AND ADJUSTMENTS
Warning:
disconnected before adjusting, adding accessories, or checking a function on the tool.
INSTALLING OR REMOVING THE BATTERY PACK (FIG 2)
IMPORTANT!
The battery pack is not fully charged when it is purchased. Before using the hedge trimmer
for the first time, charge the battery pack. Make sure to read all safety precautions and follow the instructions in the
Charging Battery section.
Warning:
is switched off before insertion or removal of the
battery pack.
• To install the battery pack, slide the battery pack
(1) into the bottom of the tool housing (2) all the
way until it locks in place with a click, as shown
in FIG 2. Lightly pull on the battery to ensure it is
locked into place and will not accidentally fall out
of the tool, causing an injury.
• To remove the battery pack, pull the battery pack
away from the tool while depressing the battery
locking tab (3).
IMPORTANT!
DO NOT remove the blade assembly unless it needs sharpening,
straightening, or replacing. Take it to a qualified person for repair.
1
always be sure that the tool is switched off and the battery is
always be sure that the tool
English
2
6. Rear Switch
7. Battery Pack
8. Battery Locking Tab
9. Blade Cover
2
9
3
4
5
6
7
FIG 1
FIG 2
1
8
3
Publicité
