Publicité
Les langues disponibles
Les langues disponibles
ELECTRIC KETTLE
CLEANING
1. Remove the plug from the power supply before cleaning the kettle.
2. Fill 0.5 L vinegar into the kettle and let it soak for more than one hour, add two
spoons of citric acid into it, and fill water to the Max. Level, heat water to until to boiling,
pour the water in 30 minutes, and then flush the kettle with clean water.
3. Spill hangover from the kettle, than use the wet cloth to clean.
4. Fill water into the kettle, after boiling than spill . Repeat it for four or five times, the
kettle can be used again.
5. If necessary, repeat the above process several times.
6. Pull the filter from the kettle, use the clean water to clean. ( It is not allow to use the
metal brush), than insert into the kettle mouth after it dries.
INFORMATION FOR USERS OF DOMESTIC APPLIANCES
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for
environmental safe recycling.
9
Publicité
