Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
Preparing Your Kettle
BEFORE FIRST USE: Remove any
packaging material or stickers from your
kettle.
1. Place the power base on a flat, stable
surface.
2. Fill the kettle to the "Max" indicator on
the water level window (2 Liters).
(Fig. 1)
3. Ensure that the anti-scale filter is
attached to lid. If it is not, then snap
the anti-scale filter into place.
4. Snap the lid onto the lid hinge pins
that are on either side of the kettle
and lock the lid in place.
5. Place the kettle on the power base
and press the On/Off button.
6. Set the variable temperature control
to the highest temperature setting
(100˚C) and let the water come to a
boil until the kettle shuts off
automatically. (Fig. 2)
7. Discard this water and repeat the
process one more time.
8. Rinse the kettle two or three times.
The kettle is now ready for use.
MAX
Level
(2 Liters)
Fig. 1
Fig. 2
Variable
Temperature
LED
Control
Temperature
Display
Using Your Kettle
1. Lift the kettle off the base before
filling.
2. Press the lid release button for easy
filling. (Fig. 3)
Lid Release
Button
Fig. 3
3. Fill the kettle to the desired amount of
water using the water level window as
your guide. Ensure that water is
between the 'MIN' and 'MAX' levels.
CAUTION: Do not allow kettle to boil dry
as this will cause damage to the kettle.
WARNING: If the kettle is overfilled,
there is a risk that water will spit out of
spout.
4. Make sure that the lid is securely
locked in place and that the kettle is
seated correctly on the base.
5. The LED temperature display on the
control panel will blink 'OFF' when
the kettle is placed on the power
base. Press the On/Off button to turn
the unit "On". The power "On" light will
illuminate.
6. Turn the variable temperature control
to the desired temperature, 30˚C to
100˚C or push it to set it directly to
100˚C . Once the temperature of the
water has reached the set
temperature, the unit will
automatically shut off and the power
"On" light will turn off.
7. If you wish to keep your water at the
set temperature, press the
temperature hold button. The
temperature hold light will now
illuminate. (Fig. 4)
Temperature
Hold
Button
Fig. 4
Variable
Temperature
Control
5
OPERATING INSTRUCTIONS
8. To stop the temperature hold feature,
press the temperature hold button
one more time and the temperature
hold light will turn off.
9. To turn the unit "Off" depress the
On/Off button. The power "On" light
will turn "Off".
10. Remove the kettle from the power
base for convenient and easy serving.
CAUTION: Do not place hot kettle
directly on furniture or flammable
materials. Use a hot plate or cloth under
the kettle when placing on a table,
countertop or other furniture.
NOTE: The kettle will not turn on if the
temperature of the water in the kettle is
higher than the temperature selected.
11. After use, empty the kettle and ensure
that the temperature hold is "Off".
The unit will automatically shut off
when the set temperature of the water
has been reached.
12. Unplug the power base from the
electrical outlet.
Care and Maintenance of Your
Kettle
WARNING: Always disconnect the
appliance from the power source before
cleaning. Never immerse the kettle or
base in water or any other liquid.
It is necessary to clean your cordless
kettle regularly to ensure optimum
performance. Mineral deposits in tap
water may cause the water level window
and the inside of the kettle to discolor.
1. To remove build-up, fill the kettle
with 1 part vinegar and 5 parts
water and leave it unplugged
overnight or for a period of
approximately 8 hours. Do not use
cordless kettle while descaling
solution is inside.
2. After the period of soaking, empty
the kettle. Due to the fact that a small
amount of solution will be left in the
kettle, it is necessary to rinse the
kettle out with clean water 2 or 3
times. Your kettle is now ready for
use.
3. The outside of the kettle can be
wiped clean with a soft damp cloth.
NOTE: Never use any chemical, steel
wool, or abrasive cleaners to clean any
part of the kettle.
To Shorten Power Cord Length:
Wrap the extra cord length around
hidden cord storage until length is correct
for base placement. Make sure that the
cord has been properly wrapped and the
base is seated firmly.
Don'ts
•
Never use the cordless kettle for
boiling or heating anything other than
water.
•
Never place any utensils, containers
or baby bottles in unit.
•
Never immerse unit or power base in
water or any other liquid.
•
Never let unit run dry.
•
Never leave unit unattended when in
use.
Do's
•
Use caution when pouring hot water.
•
When boiling water for baby formula,
always boil water to boiling point
(100˚C) and then let it cool. Follow
the manufacturer's instructions on
how to prepare the baby formula.
•
Always ensure that there is water in
kettle before turning the unit on.
•
Always use fresh water.
•
Always unplug power base when unit
is not in use.
•
Rinse the anti-scale filter regularly.
•
Hold kettle firmly when lifting from
power base.
Hints & Tips
•
Boil water for hot water bottles.
•
Heat water for manicures and
pedicures.
•
Boil water for baby formulas.
•
Warm water for warm compresses.
•
Boil water for tea, coffee and instant
soup broth.
6
Publicité
