Hoover H-Free 700 Manuel D'utilisation page 10

ACCESSORIES
2 IN 1 CREVICE & DUSTING BRUSH WITH QUICK &SECURE CONNECTION*, 2-1 LARGE DUSTING & FURNITURE
BRUSH WITH QUICK &SECURE CONNECTION*, LONG FLEXIBLE CREVICE TOOL WITH QUICK &SECURE
CONNECTION*, MULTI FUNCTION UP TO TOP TOOL ADAPTOR WITH QUICK &SECURE CONNECTION*,
MINI TURBO NOZZLE WITH QUICK &SECURE CONNECTION*, RADIATOR TOOL WITH QUICK &SECURE
CONNECTION* AND DEEP CLEANING BRUSH WITH QUICK &SECURE CONNECTION.
The above accessories can be fitted directly into the handheld unit or one side of the tube. [5]
NOTE: The mini-turbo nozzle is ideal for deep cleaning textile surfaces (i.e. sofas) and pet hair removal. Move it steadily
backwards and forwards. After using, please remove hair / threads collected on the brush with scissors if necessary.
NOTE: The long flexible crevice tool is ideal for cleaning in hard to reach areas, underneath furniture and in your car.
NOTE: The radiator tool is ideal for cleaning inside and around cabinets, radiators, couches, blinds and more.
NOTE: The deep cleaning brush is useful to clean in tight spaces without scratching surfaces, and inside your car.
NOTE: The multi-function up to top tool adaptor is recommended to reach high furniture and ceilings. You can attach to
whatever tool, apart from the mini turbo, to clean high corners, curtains, or above high furniture.
ACCESSORY BAG*
Accessories can be stored in the accessory bag.
WALL MOUNT*
Hang the wall mount to the wall, using the three screws included in the product [2] to hang product, 2in1 crevice &
dusting brush, 2in1 large dusting & crevice and mini turbo nozzle (when included).
CLEANER MAINTENANCE
Emptying the Dust Container
1. Press the handheld release button and remove the tube. [6]
2. Press the dust cup empty button to release the bin flap and empty the contents. [7]
3. Close the dust cup flap up, you will hear a click when fully locked.
NOTE: It is recommended to empty the dust cup after each use or when dust is up to the max fill lines.
Cleaning the Dust Container and Filter
1. Press the handheld release button and remove the tube. [6]
2. Press the dust cup empty button to open the bin flap and empty it. [7]
3. Push down the battery pack release button and remove the battery pack. [8A,8B]
4. Turn the dust bin in a clockwise direction, align the arrow marks and remove from cleaner main body. [9]
5. Clean any excess dust from the mesh filter [J2], hold the mesh firmly with one hand and with the other turn the cover
cup [J3] in a clockwise direction to remove the mesh filter. [10]
6. Once the cup cover is removed, pull the HSpin-Core Technology assembly away from the main body. [11A] Hold the
top of the motor cover [J1] and remove the mesh filter by pulling away. [11B]
7. Press the two exhaust filter release buttons and then remove the exhaust filter. [12A, 12B]
8. When cleaning the the filters, wash the mesh filter [J2] and exhaust filter [S] in luke warm water. [13] Please ensure
all parts are completely dry before reassembling. [14]
9. When reassembling the HSpin-Core Technology, firstly reattach the mesh filter to the motor cover, [15A] then align
this assembly with the motor shaft, paying particular attention to the flat surface on the motor shaft. [15B]
10. Secondly again hold mesh filter and refit cover cup: rotate in an anti-clockwise direction to lock [16]. PLEASE
ENSURE YOU DO NOT OVERTIGHTEN AS THIS MAY DAMAGE THE THREAD.
11. Complete reassembly of the handheld unit and then attach it to the wall Mount.
NOTE: Do not use hot water or detergents when cleaning the exhaust filters. In the unlikely event of the exhaust filters
becoming damaged, fit a genuine Hoover replacement. Do not try use the product without a filter fitted.
IMPORTANT: For optimum performance, always keep your mesh filter clean. We recommend that the filter should be
washed at least once a month.
* Certain Models Only
5
GB