MSI B365M PRO-VDH Mode D'emploi page 10

PCI_E1~3: PCIe Expansion Slots
Important
If you install a large and heavy graphics card, you need to use a tool such as MSI
y
Gaming Series Graphics Card Bolster to support its weight to prevent deformation of
the slot.
For a single PCIe x16 expansion card installation with optimum performance, using
y
the PCI_E1 slot is recommended.
When adding or removing expansion cards, always turn off the power supply and
y
unplug the power supply power cable from the power outlet. Read the expansion
card' s documentation to check for any necessary additional hardware or software
changes.
JRGB1: RGB LED connector
This connector allows you to connect the 5050 RGB LED strips 12V.
1
1 +12V
3 R
CAUTION
Do not connect the wrong type of LED strips. Connecting the 5V LED strip to the JRGB
connector will result in damage to the LED strip.
Important
The JRGB connector supports up to 2 meters continuous 5050 RGB LED strips
y
(12V/G/R/B) with the maximum power rating of 3A (12V).
Always turn off the power supply and unplug the power cord from the power outlet
y
before installing or removing the RGB LED strip.
Please use MSI's software to control the extended LED strip.
y
10
Rear I/O Panel
2 G
4 B
PCI_E1: PCIe 3.0 x16 (CPU lanes)
PCI_E2: PCIe 3.0 x1 slot (PCH lanes)
PCI_E3: PCIe 3.0 x1 slot (PCH lanes)
Extension cable
JRGB1
LED strip