Publicité
Les langues disponibles
Les langues disponibles
FAULTS
Faults table
When you have any doubts about whether your appliance is working properly you should not
immediately assume that it is defective. We recommend that you should in any case check the
points in the following table.
Symptom
The appliance emits a slight
odour when used for the
first time.
The appliance does nothing;
the lighting is not lit.
Temperature inside
refrigerator too high or too
low.
Appliance makes a noise.
The LED lighting does not
work.
Ice building up.
'dr' shows on the display.
Warning
It is normal for the cooling circuit to make gurgling or expansion noises.
If you are unable to solve the problem then contact the service centre. When you do so, state the
type, model and serial number shown on the type plate or label on the inside of the appliance.
EN 26
Possible cause
New appliance.
Plug not in socket.
Thermostat setting
incorrect.
The door seals are dirty or
the seals are damaged.
Incorrect positioning of
food in the refrigerator (or
freezer).
There is an object against
the appliance.
LED lamp faulty.
Freezer compartment door
not closed properly.
The door seals are dirty or
the seals are damaged.
The door has been
opened for too long.
Solution
This is normal and disappears
when the appliance starts cooling.
Insert the plug in the socket.
Adjust the thermostat properly.
Clean the door seals. Call the
service centre if the door seals are
damaged.
Place foods in the proper manner in
the refrigerator or freezer.
Remove the object.
Consult a service technician about
LED lighting that is not working. For
safety reasons, you are not allowed
to repair LED lighting yourself.
This product contains a light source
of energy efficiency class G.
Make sure that the door is closed
properly.
Clean the door seals. Call the
service centre if the door seals are
damaged.
Make sure that the door is closed
properly.
Publicité
