Thompson Retractor Uncompromised Exposure GENERAL Manuel D'utilisation page 9

USER MANUAL / BILATERAL HEAD + NECK SET UP
Bilateral Head and Neck Set Up
STEP 1: RAIL CLAMPS
Place Elite Rail Clamp onto the rail over the sterile drape and turn top knob clockwise to tighten. Repeat on opposite side of table.
STEP 2: ANGLED ARMS
Insert the angled arm into the joint on the Elite Rail Clamp, position, and flip the cam joint handle to lock. Repeat on opposite side.
8
THOMPSON RETRACTOR USER MANUAL QUESTIONS OR ADDITIONAL INFORMATION: 1.800.227.7543