ENGLISH
What you will find in the box:
KYONE Trimmer
VINTAGE STYLE Trimmer
Charging Base/docking station (on selected models!!)
VINTAGE STYLE Trimmer
Adapter
Attachment combs (1/2/3mm) (1.5/3/4.5/6mm)
Cleaning brush
Oil bottle
User Manual
Device operation
Description.
1 Cutting head
2 ON/OFF switch
3 Indicator light
(Blue/red is charging)
(Green/Off is charged)
4 Attachment combs
(3 pcs: 1/2/3mm) or
(4 pcs: 1.5/3/4.5/6mm)
Using and charging the battery without a charging station.
The device contains a lithium battery. When the device is delivered, it is not yet fully charged. You
should therefore fully charge the battery before using it for the first time. Before charging, make sure
that the mains voltage corresponds to the voltage indicated on the device.
Connect the supplied adapter to mains power and then directly into the device. The battery only
reaches its full performance capacity after a few charging cycles.
While charging, a BLUE/RED indicator light will be lit. When the battery is fully charged, the light will
turn off/the light will be green.
Charging the battery while it is not yet (completely) empty does not affect the performance
of the device. However, we recommend that you allow the battery to be completely discharged from
time to time and then fully charge it again to extend battery life.
Arrange the power cord so that no one trips over it.
Keep the cord, device and adapter away from hot surfaces.
Charging with a charging station. If included!
Check that the charging station is on a flat surface. Connect the supplied adapter to the charging
station. Then plug the adapter plug into a working power outlet. Place the switched off device in the
charging station.
Turning the device on and off.
The device is switched on or off with the on/off switch. (2)
1_______
2______
3__________
10
_______4_________