5) Set number of cups to match the water in the tank using the
Aroma Function: For small batches of 2-4 cups use the aroma function
of water and coffee tend to brew too quickly for proper extraction of flavor. The aroma function heats
and dispenses water in timed intervals to extend the cycle to its ideal duration.
6) Set the desired strength setting using the
Start with medium strength and adjust subsequent cycles to match the beans and your prefered
taste. Mild, medium and strong brew cycles are indicated on the display with the symbols
3) Swivel the filter out (figure 1/B).
Insert #4 paper filter or permanent filter into the brew basket.
Push the swivel filter holder back into place.
4) Fill the tank. Cups are measured as 5 oz each.
Place the carafe (figure 1/A) with its lid onto the warming plate (figure 1/N).
Swivel the cover using the lever until it locks.
The cover can be closed manually with the release lever (figure 1/C).
The grinder is deactived when the cover is closed.
Cups
button.
Strength
English
button.
. Small amounts
Aroma
.
7