Schneider Airsystems SIP 600 Notice D'utilisation D'origine page 8

GB
SIP 600
Caution: Depressurise the unit!
1. Unscrew the
(Figure 2).
2. Connect the gun to the compressed air.
3. Press the trigger lever (item 02). The
rubber piston (item 07) is pushed for-
ward, held by the safety chain.
4. Disconnect the gun from the compressed
air.
5. Guide the rubber piston into the housing
and press it backwards using the silicone
puppet (Figure 3). This avoids air pock-
ets.
6. Cut the silicone puppet open at the front.
7. Inset the nozzle into the union nut
(item 05).
8. Screw the union nut (item 05) tightly
(Figure 6).
1.7 EC Declaration of Con-
formity
Cartridge gun
SIP 600
Year of CE mark: 2008:
We declare under our sole responsibility that
this product complies with the following
guidelines and standards:
DIN EN ISO 12100; DIN EN 792; 98/37/EC
(until 2009-12-28);
2009-12-29)
pp Marco Lodni
Head of Development/Testing
08.2008
Schneider Druckluft GmbH
Ferdinand-Lassalle-Str. 43
72770 Reutlingen
I/ 4
union nut (item 05)
Serial no.
G040130
2006/42/EC (from