Important; Operating Instructions; Temperature Setting - Rotel U830CH1 Mode D'emploi

Table des Matières

Publicité

 IMPORTANT
o
Before using the brush, ensure your hair is clean and completely dry, and comb
thoroughly.
o
For best results, do not brush too much hair at once.
o
Do not place the brush on the same section of hair longer than 20 seconds.
 OPERATING INSTRUCTIONS
This electric hair brush is used for straightening and combing hair. It delivers shine and
smoothness even to puffy or frizzy hair and offers professional-looking results.
The body (1) of the brush is resistant to high temperatures and the paddles have anti-burning
tips.
o
Press and hold the (5) button for approximately 2 seconds to switch on the appliance,
then select the appropriate temperature for your hair type. The temperature can be
adjusted in steps of 5℃ by pressing (+), increase temperature (4) or (-), decrease
temperature (3). Default temperature is 180°C.
o
Once the hair straightening is finished, switch off the appliance by pressing and
holding the (5) button for about 2 seconds, then disconnect the appliance from the
mains by pulling the plug. Do not pull the cord. Allow appliance to cool before storing.
The brush turns off automatically after 1 hour if left switched on accidentally.
o
During the styling, the brush generates ions that eliminate static electricity, thus frizz,
for a silky smooth and shining finish.
 TEMPERATURE SETTING
o
Vary the temperature as shown below to use the brush according to your hair type
(thin, normal and thick or curly hair) or the styling you desire.
Fragile/thin/dyed hair
Normal hair
Dense/thick/curly hair 210-230 °C.
o The display can be switched between degrees Celsius (°C) and Fahrenheit (°F) by
pressing (+) and (-) simultaneously.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
170-190°C
Selecting a low temperature may increase the
duration of hair straightening
200-210°C.
24

Publicité

Table des Matières
loading

Table des Matières