ETI MSFP-SMK-22 Guide D'utilisation Et D'entretien

MUlti-seleCt Flat Panel sUrFaCe MoUnt Kit installation instrUCtions
PackagE conTEnTS
Description
Multi-select flat panel surface
mount kit
note: Keep your receipt and these instructions for proof of purchase. Highly recommended to have experienced electrician install to avoid any possibilities of electrical shock
or fire. Please wear gloves and protective Eyewear to avoid injuries. If any smoke or sparks develop, please turn off power immediately and notify appropriate personnel.
WarninG: Shut off the power at the circuit breaker or fuse panel before removing the old fixture, ballast, or fluorescent tubes. Do not use any electric generator to test the LED
light. Please abide by related country, regional and local law and regulations when install this fixture. Please turn off the power before installation or maintenance. Proper grounding
is required to ensure safety. Please check if there is any damage during shipping. If so, please contact. Please read the installation instructions carefully to check whether all the
accessories are available. After confirmation, install the LED light according to installation steps.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
kIT IncLUDES
Parts List
1'x4'
70344101
Screw B (KA 4X25) 6
Expansion Bolt 6
Frame 0
Frame 2
Frame 2
Corner Bracket 4
InSTrUcTIon
13.78 inches
23.25 inches
Expansion Bolt
2x2
Drill holes into drywall ceiling with distances shown in the pictures above. Insert expansion bolts inside the holes.
1
Attach corner brackets to the sides with
2
mounting holes. Slide to attach other
sides and assemble the surface mount.
Slide the light panel in the direction
5
shown above. Push it to the bottom.
WarninG: Carefully read the information given in this manual before beginning the assembly and installation. Failure to do so could lead to electric shock, fire, or other
injuries which could be hazardous or even fatal. • Ensure power to the fixture(s) you are working on is shut off. Either remove the fuse or turn off the circuit breaker.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
See website for Warranty, Troubleshooting or Care and Cleaning details at www.ETiSSL.com.
Use and Care GUide
Quantity
1 Set
70343101 MSFP-SMK-22
Quantity
2'x2' 2'x4'
70343101 70345101
4 6
4 6
4 2
0 2
0 0
4 4
13.78 inches 11.81 inches
Mount the surface mount to the ceiling
3
with screws.
Snap the removed side panel into the
6
ceiling bezel to complete the installation.
Questions, problems, missing parts? Call ETiSSL Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday
1-855-ETI-SSLI (1-855-384-7754) www.ETiSSL.com
70344101 MSFP-SMK-14
lmage
0.16 inches diameter, 0.98 inches length
0.21 inches diameter, 1.06 inches length
23.34 inches length, 2.65 inches height
47.32 inches length, 2.65 inches height
11.69 inches length, 2.65 inches height
0.32 inches length, 2.63 inches height
13.78 inches
23.25 inches
Expansion Bolt
2x4
order # 70343101
70344101
70345101
Size Material
Zinc Coated lron
PVC
Aluminum
Aluminum
Aluminum
PC
13.78 inches 11.81 inches 13.78 inches
11.6 inches
Expansion Bolt
1x4
Remove the side plate without mounting
4
holes as shown in the illustration.
Part # MsFP-sMK-22
MsFP-sMK-14
MsFP-sMK-24
70345101 MSFP-SMK-24