Safety Information; Electrical Requirements; Grounding Instructions - Danby Premiere DDR30B1GP Guide D'utilisation Et Soins De Propriètaire

IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
FOR YOUR SAFETY: Read these instructions carefully before operating the unit.
NOTE
The WARNING instructions issued in this manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense, caution, and carefulness are factors that cannot be built into all ap-
pliances. These factors must be supplied by the person(s) installing, maintaining, or operating the appliance. Failure to
install, maintain, and/or operate the equipment according to the manufacturer's instructions may result in conditions which
can produce bodily injury and/or property damage. Contact your dealer, service agent, or the manufacturer about any
problems or conditions you do not fully understand. For Danby Customer Service call (1-800-263-2629)
ELECTRICAL
REQUIREMENTS
To reduce the risk of re, electric shock, or personal injury, all wiring and grounding must conform with the latest edition of
Local and National Electrical codes.
• It is the customer's responsibility to have the wiring and fuses checked by a quali ed electrician to make sure adequate
electrical power is available.
• This appliance is designed to operate on an effectively grounded, seperately branched, polarized, 3-wire, 120 Volt
60 Hertz (alternating current) circuit protected by a 15 ampere fuse, equivalent fuse or circuit breaker.The three-prong
grounding plug on the power cord should be plugged directly into the aforementioned receptacle rated 110/120 V.A.C.
• Do not connect the dehumidi er to a multiple socket outlet that is also being used for other electrical appliances.
FOR YOUR SAFETY: To reduce the risk of fi re or explosion, do not store or use gasoline or other fl ammable va-
pors or liquids in the vicinity of this or any other appliance.
GROUNDING
INSTRUCTIONS
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a quali ed
electrician or serviceperson if you are in doubt as to whether your appliance outlets are properly grounded.
• This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electrical
shock by providing a path of least resistance for electrical current. This appliance is equipped with a cord that has an
equipment-grounding conductor and 3 prong grounding plug. The plug must be connected into an outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
• Do not modify the plug provided with this appliance. If it will not t the outlet, have a proper outlet installed by a quali ed
electrician.
• If the household electrical supply does not meet the above speci cations, or it you are not sure your home has an
effective ground, have a quali ed electrician or your local electrical utility company check it and correct any problems.
SAVE THESE INSTRUCTIONS
2