Eurotops BK596 Mode D'emploi page 11

BK596
*BEFORE FIRST USE, IT IS IMPERATIVE TO RESET YOUR WATCH BY FOLLOWING THE
Fig.1

DCF Radio controlled signal reception

Automatic reception of radio control signal twice a day: 2:00 AM and 3:00 AM

12-hour time format display

Day of the week display and verification of the quality of signal reception

Automatic summer time (DST)
Note:

DO NOT turn the crown to do the time setting otherwise the watch will not receive the DCF
signal after this operation. Time setting could ONLY be performed through SIGNAL
RECEPTION or RESET procedure.

Do not add any stopper to the crown when you do not use the watch.
Press and hold button B for about 3 seconds.to enter RCC mode, the second hand will move forward and
stop at 45 seconds.
Receiving time lasts between 2 to 8 minutes.
DO NOT MOVE THE WATCH OR TOUCH THE CROWN OR BUTTONS WHEN IT IS IN RCC MODE!
If it fails to set the right time, renew the operation to enter RCC mode (refer to RESET procedure).
48915
RCC WATCH "CADRE D'OR"
INSTRUCTION MANUAL
PROCEDURE IN SECTION "RESET".
PRODUCT DESCRIPTION
A.
Display of the day of the week/ RCC signal reception quality
B.
RCC MODE
FEATURES
MANUAL SIGNAL RECEPTION
1
English