Low Suction after Using
few minutes
Low Suction after Using
for some
period.
Cord can not pull back
Cord rewinding
automatically
1. The big object such as
polybag, cloth blocked
in floor brush or hose.
1. The dust is full in
container
2. The filter is blocked.
3. The filter was fixed
back wrongly.
The brake wheel inside
of rewinder was stucked.
The Brake didn't return
when in the process of
cable pulling out.
Po we r o ff t h e m a c h i n e a n d c h e c k i f
something block in brush or in hose.
Please take out dust container, remove the
dust in container.
1. Clean the dust container as following step:
2. Clean the wind outlet HEPA Filter at the
rear:
When put back the plastic filter, keep note to
aim the groove parts on plastic filter at wind
inlet hole on container, the top of three cilps
must be fit at dust container groove.
Press the cord button down and keep it
while while pull the cable out a little bit,
then the cable can be pulled back.
Press cord button more times and or pull
out the cable more times until the problem
gone.
www.DeubaXXL.de
17
HEPA Filter