Publicité
EU DECLARATION OF CONFORMITY
Product: Loadsafe Wireless Compression Cell WNI-ATEX
Product Description: Intrinsically safe compression loadcell 5t - 1000t, capable
weighing and dynamic load monitoring in hazardous
environments; such as on, and offshore, oil, gas and chemical
industries in zones classified 2,1 and 0.
Designed for use with Crosby Straightpoint's Handheld plus (HHP-
SW-ATEX).
Marking:
Manufacturer: Straightpoint (UK) Limited,
Unit 9, Dakota Park,
Downley Road,
Havant,
Hampshire,
PO9 2NJ, United Kingdom
This conformity is based upon compliance with the application of harmonized or applicable technical standards and, where applicable or
required, a European Union Notified Body certification.
Directives: The described product above, is in conformity with:
EU ATEX Directive: Equipment intended for use in Potentially Explosive Atmospheres 2014/34/EU;
EU Machinery Directive 2006/42/EC;
EU Radio Equipment Directive 2014/53/EU (RED Directive);
EU RoHS 2015/863/EU.
Applicable Harmonised
ATEX Directive 2014/34/EU
Standards:
EN 60079-0:2018 Explosive Atmospheres. Equipment. General Requirements
EN 60079-11:2012/ISH2:2019 Explosive Atmospheres. Equipment by Intrinsic safety "I"
IEC 60079-26:2014 Explosive Atmospheres. Equipment with EPL Ga
EU Machinery Directive 2006/42/EC
EN ISO 12100:2010 Safety of machinery - General principles for design – Risk assessment and risk reduction.
RED Directive
EN301 489-1 v2.2.3 (2019-11) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services,
Part 1: Common technical requirements;
EN301 489-3 v2.1.2 (2021-03) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services,
Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz;
EN301 489-17 v3.2.4 (2020-09) ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services, Part 17: Specific conditions for Broadband Data Transmission Systems;
BS EN 62368-1:2020+A11:2020 Audio/video, information and communication technology equipment. Safety
requirements.
RoHS
EN IEC 63000:2018 Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances.
Notified Body: CSA Group Netherlands B.V.
Utrechtseweg 310
6812 AR, Arnhem
Netherlands.
Notified Body 2813. Examination Certificate Sira 16ATEX2108X
Quality Management: ISO 9001:2015 Quality Management Systems Requirements: BSI Certificate No. FM 584438
Straightpoint (UK) Limited declare that under our sole responsibility for the manufacture and supply of the product detailed above, that it
conforms to the essential health and safety requirements of the listed applicable Directives and applicable harmonised technical Standards.
EU Authorised
CROSBY EUROPE
Representative:
Industriepark Zone B N°26
B-2220 Heist-op-den-Berg
Belgium
Phone: +32 0 15 75 71 25
Email:
SQS661 Issue 5
Registered in England
October 2021
Registered
Office:
II 1 G & Ex ia IIC T4 Ga
No.
4375389
·
VAT Registered
Unit
9.
Dakota Par
k. Down ley
R
d. Havant.
Hampshire P09 2NJ
of both
Signed, on behalf of Authorised
Representative:
Name: Thomas Dietvorst
Position: General Manager
Date: October 20
No.
793 2451 14
·
UK
th
2021
Publicité
