OW Lee CASUAL FIRESIDE FORMA 5152-2545O Mode D'emploi page 9

LAVA GRANULE MEDIA PLACEMENT
Pour the lava granules into the Outdoor Fire Pit so that the burner
is covered by 1/2" and spread evenly.
NOTE: See Page 7 For Protective Screen Media Clearance
(See Figure 1 and 2)
Figure 1.
Pour the first bag of the lava
granules media into the burner
support.
Figure 2.
Pour the additional bag of lava
Protective Screen
granules onto the burner support.
Spread the media evenly covering
the burner.
Note: See Page 7 for Protective Screen Media Clearance
CAUTION: BURN HAZARD. LAVA GRANULES
WILL REMAIN HOT FOR SOME TIME AFTER USE.
YOU MUST MAINTAIN THE LAYOUT AS SHOWN TO ENSURE PROPER OPERATION OF YOUR FIRE PIT.
IF YOU NEED TO REPOSITION ANY MATERIAL TO MAINTAIN THE PROPER LAYOUT, USE HEAT
RESISTANT GLOVES OR ALLOW MATERIAL ADEQUATE TIME TO COOL BEFORE HANDLING.
CAUTION: Lava granules used in a fire pit are porous and when heated up to normal operating temperature
can cause trapped gasses or moisture to expand and cause a "pop" and "launch" outside of the fire pit, which
could cause injury or property damage. Allow lava granules to completely dry after getting wet , rained on or
hosed off, before lighting and using the fire pit.
Page 9