- Conn. security
The options are On and Off depend on the gateway you are
using.
- Gateway information
Most of WAP gateways do not require a User ID and Password.
If your gateway need them to connect to it, then your network
should provide them, and you must set them up correctly before
trying to browse a WAP site.
- Bearer
Data
GPRS
- Data settings
The service settings are only available when Data is chosen as a
bearer service.
These values of setting are provided by your network.
IP address
: Enter the IP address of the WAP gateway you are
using to access.
Dial number : Enter the telephone number to dial to access your
WAP gateway.
Call type
: Select the type of data call.: Analogue or ISDN
(Digital).
Call speed
: The speed of your data connection.
User ID
: The user identity for your dial-up server (and NOT
the WAP gateway).
Password
: The password required by your dial-up server
(and NOT the WAP gateway) to identify you.
Accessing the Menu
77