Dexter power CDT219LD.W Manuel D'utilisation page 97

TECHNICAL DATA
Type CDT219LD.W (CDT -designation of machinery, representative of Cordless Drill)
Voltage
Charger input
Charger output
Charger Model
Battery pack model
Battery capacity
No. Of Battery cells
Charging time
No load speed
Number of clutch positions
Max torque
Chuck capacity
Max. drilling capacity
Machine weight
NOISE AND VIBRATION DATA
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841:
Drilling into metal
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used especially what kind of
workpiece is processed dependant on the following examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
Steel
Wood
Vibration emission value a
Uncertainty K = 1.5m/s²
18V
100-240V~50/60Hz, 42W
10.8-20V 1500mA
ACG1815D
ABP1820SD
2.0Ah Li-Ion
80min
0-400/0-1500/min
18+1
40 Nm
13 mm
10 mm
35mm
2.1 kg
L 64dB(A)
pA
3dB(A)
L 75dB(A)
wA
3dB(A)
=4.48m/s²
h, D
EN
5
97