Redfox SP 70/04 E Notice D'installation Et D'emploi page 6

NSTRUCTION FOR USE
Attention! Before the fi rst use of the device you must remove protection foil from all surfaces and wash the
device with moist cleaning cloth dipped in the water with detergent. Than dry it with cloth.
The fi rst switching on device must be performed in a well ventilated room. The "burning of plates" takes about
30 minutes. After these 30 minutes the device is ready for operation.
Turn the knob (A) and adjust required performance. Pilot lamp (B) will light. Pilot lamp (B) lights when the
device is connected to the electricity and switched on. Switch the device off by turning the knob (A) into
position „0".
MAINTENANCE
We recommend to have the device checked once a year by the professional service. Only qualifi ed or
competent persons can do interventions in the product. Comments and recommendation. Use the device
only under supervision.
B
A
6