Publicité
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (10F) into the large holes in the ENDS (A
and B). Repeat this step for the HUTCH ENDS (C and D),
UPRIGHTS (E and F), HUTCH UPRIGHT (G), MODESTY
PANEL (J), SHELF (K), HUTCH SHELVES (L and M)
and BOTTOM (N).
(29 used)
Page 6
Do not tighten the TWIST-LOCK® FASTENERS in this step.
10F
A
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
B
420475
www.sauder.com/services
Publicité
