Nordic Deltaco SH-IPC07 Manuel D'utilisation page 5

ENG
Thank you for choosing Deltaco!
1. MicroSD slot
2. Reset button
3. Speaker
4. Microphone
5. LED
The camera has an attached DC cable with
a DC connector. Use the cable to connect
to the power adapter.
Mounting
1. Drill holes in the wall for the camera.
2. Mount the camera by using the screws.
3. Adjust the camera angle by aiming and
rotating it. Fasten the screw.
Reset
Press and hold about 5 seconds for reset.
Any changed settings will change to
factory default.
LED status
Red = the camera is just turning on or there
is something malfunctioning.
Flashing red = waiting for connection.
Blue = Working correctly.
Flashing blue = Connecting.
5
ONVIF
For use of ONVIF, please check the prod-
uct's page on Deltaco's website.
Install and use
1. Download and install the app "Deltaco
smart home" from Apple App Store or
Google Play Store on your mobile device.
2. Launch the app "Deltaco smart home".
3. Create a new account or log in to your
existing account.
4. Tap "+" to add the device.
5. Choose category and then the type of
product from the list.
6. Connect the device to power.
7. If the LED/lamp does not flash: Reset
the device.
If the status indicator flashes: Confirm in
the app.
8. Confirm the Wi-Fi network and
password.
9. Enter the device name.
Cleaning and maintenance
Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the
device does not operate correctly, replace
it with a new device.
Clean the outside of the device using a
soft cloth.
Support
More product information can be found at
www.deltaco.eu.
Contact us by e-mail: help@deltaco.eu.