Publicité
Les langues disponibles
Les langues disponibles
Using the NL 100
The NL 100 uses an induction loop system which will work
together with your hearing aid, when set to the T position,
to help you hear sounds more clearly
1
Slide the ON/OFF switch to 'ON' The green power LED
will light up
If the power LED turns red, the battery power is low and
you should change the battery as soon as possible
2
Switch your hearing aid to 'T' or 'MT' mode
3
Adjust the volume using the wheel on the NL 100
4
Your NL 100 is now ready for use and you can speak to
your callers using the built in microphone
5
Slide the ON/OFF switch to 'OFF' at the end of your call to
save battery power The power LED will go out
You can use the product adaptor supplied with your NL
100 to connect to compatible MP3 devices or mobile
phones Follow the steps above
Service−Hotline UK Tel 0844 800 6503, cost via UK landline at time of going to print: 6p connection charge and 5p/min thereafter,
different charges may apply if calling from a mobile phone Hotline hours are Monday to Friday, 9am to 5pm, excluding public and national holidays
Using the NL 100
GB
15
Publicité
