Dynex DX-PDVD7 Guide De L'utilisateur page 10

10
Playing video and audio discs
Turning on the player
To turn on the player:
Playing discs
To load and play a disc:
Pausing discs
To pause a disc:
Download from Www.Somanuals.com. All Manuals Search And Download.
2 To use the remote control, point it at the remote sensor on the player. (Operate in the
range of 10 feet (3.3 meters) and 60° ).
3 Remove the batteries if the remote control will not be used for an extended period of
time.
Tip: Generally, batteries last for about one year. Replace the batteries if the remote control
does not work.
1 Open the LCD screen.
2 Turn on the player. The power LED lights green and the LCD screen turns on.
1 Press the OPEN button to open the disc tray.
2 Hold the edges of the disc and place the disc in the center of the tray with the label
side up.
3 Press the OPEN button to close the disc tray. The player starts playing the disc.
4 Turn the VOLUME knob to adjust volume (even when using headphones).
If the player is connected to a TV or an amplifier, adjust the volume on the connected
device.
5 Stop playback by pressing the STOP button on the player or remote control.
1 When playing a disc, press
2 Press (play/pause) again to resume playback.
Playing video and audio discs
(play/pause) to pause playback.