IMPORTANT SAFETY INFORMATION
Deadly risk in case of failure to comply with the documentation!
WARNING!
In order to reduce the risk of injury from fire, burns or electric shock, the safety instructions and
directions in this installation manual must be followed.
Warranty
- A warranty in terms of the safety, functionality and integrity of the product is only valid if the instructions in this manual are
followed. In case non-compliance, bodily injury and property damage may occur.
The manufacturer is not liable for damages occurring due to noncompliance with the instructions.
- The local regulations as well as the general safety and accident prevention regulations must be observed.
- The product is exclusively intended to be mounted on the wall in dry rooms. The construction must be capable of supporting the
weight of the product.
- The product has left the factory in perfect and safe working condition. The product may not be used in case of damage or
malfunction.
- Bulbs are excluded from the warranty.
General safety information and other information
- Installation may only be carried out by qualified personnel.
- Before carrying out cabling work, ensure that the lines are free of voltage. During the cabling work, ensure that the lines remain
free of voltage (e.g. prevent power from being turned on).
- The product must be grounded with a connection to a grounded metal object or an existing protective conductor.
- Before carrying out drilling work, make sure that no water or power lines are located behind the drilling area.
- The position of the product must be determined by the user prior to installation.
- The product must be installed by at least two people.
- To avoid damage to the product, it must be handled with the greatest care.
Rings and other objects that could damage the product must be removed before installation.
- The magnets contained inside the product can erase media and affect or damage electronic and mechanical components
(such as pacemakers). The required safety distances must be observed.
- Flammable materials may not be placed near the bulbs.
- The bulbs may never be touched directly. When replacing bulbs, a soft cloth may be used.
- The bulbs may never be used without a bulb holder or with a defective bulb holder.
- Objects may never be placed on the movable lighting units.
- The enclosed cleaning and operating instructions must be observed when cleaning the product or connecting external
devices via Bluetooth
- In case of damages or malfunctions, contact your retailer.
- All dimensions are given in inches (") and mm. The drawings are not to scale.
- Subject to technical changes.
®
.
3 - 20