GE APEL70 Manuel D'utilisation page 11

Troubleshooting tips...
Problem
Water on floor
Bucket Full LED light
flashing and E0 displayed
after pump mode selected
Water left in the bucket
when in pump mode
Save time and money! Review the chart below first and you may not need to call for service.
Possible Causes
No condensate hose.
Loose condensate hose
connection or cracked
condensate hose.
Bucket may not be fully
seated.
Pump not operating properly
Clogged bucket filter
This is normal
What To Do
Make sure pump hose is connected if Internal Pump On
is selected.
Make sure the condensate hose connection is tight
(cannot be pulled loose) and that nothing is blocking
the condensate hose.
Remove and reinstall bucket, making sure the bucket is fully
inserted.
if the pump is not working properly. Check to make sure the
condensate hose is not blocked, kinked or crimped.
Dehumidifier to make sure it is not clogged.
operation. Make sure to empty the bucket before long-term storage.
Care and Cleaning of the
11