Maintenance - Conrad Electronic Renkforce MX 0103USB Mode D'emploi

10. Maintenance

Regularly check the safety of the MX-0103USB, e.g. for damage to the mains unit or the casing.
If you have reason to believe that the device can no longer be operated safely, disconnect it immediately
and make sure it is not operated unintentionally. Pull the power unit out of the socket!
It can be assumed that safe operation is no longer possible if:
• there is visible damage to the device or the power unit
• the device is no longer working
• the device has been stored under unfavourable conditions for an extended period of time or
• the device has been subjected to heavy stress during transport
Always observe the following safety information before cleaning or servicing the mixer:
The device must be disconnected from all power sources before any servicing or repair work is
carried out.
Only qualified experts familiar with the hazards involved and the relevant regulations must per-
form repairs.
Apart from this, the device does not need any servicing. The device's outside should be cleaned with a soft,
dry cloth or a brush only.
Never use any aggressive cleaning agents or chemical solutions that may damage the surface of the cas-
ing.
27