Publicité
Les langues disponibles
Les langues disponibles
Cleaning
Clean the product after each use . Use ordinary soapy water . Rinse off with
fresh water and dry with a soft cloth .
• Do not use an autoclave or other type of steam cleaner .
• Avoid aggressive cleaning agents containing acids or chloride .
• Never spray the product directly with a high pressure cleaner .
• Avoid use of aggressive, abrasive, corrosive or chlorine-based cleaning
or disinfecting products .
To remove limescale
To remove limescale marks on the aluminium parts, use 3 parts 30%
household vinegar to 7 parts water and afterwards wipe the parts with a cloth
wrung out in clean water .
In countries with relatively high levels of lime in the water supply, it may be
necessary to remove limescale deposits from the aluminium parts using a
de-scaling agent such as acetic acid . Test this first on a area that is not visible
when the product is in use .
en
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent .
12
IMPORTANT
CAUTION
!
Publicité
