Publicité
Les langues disponibles
Les langues disponibles
assEMBly InsTRUCTIOns
Instructions for 3" Gate Extension
1. Begin by determining which extension or
combination of extensions is required for your
doorway or opening. attach the Top Plastic
Connector and Bottom Plastic Connector to the top
and bottom of the Extension Rod. nOTE: The
insertion point of the Top Connector is ¾" wide, and
the insertion point of the Bottom Connector is
5/8" wide.
2. Using a flat head screwdriver, remove the Top
Plastic Insert and the Bottom Plastic Insert from the
gate frame as shown.
3. Connect the Extension Rod to the gate frame as
shown.
4. Install the Top Plastic Insert and Bottom Plastic
Insert that were removed in step 2 into the ends of
the extension bar's Top and Bottom Plastic
Connector.
5. Once the required extensions are attached to the
gate, insert the 4 Threaded spindle Bolts into the
ends of the extensions you just assembled and
follow the instructions from the original pet gate
starting from step 1.
Instructions for 6" and 11" Gate Extensions
1. Begin by determining which extension or
combination of extensions is required for your
doorway opening. attach the Top Plastic Connector
and Bottom Plastic Connector to the top and bottom
of the Extension Rod.
2. Using a flat head screwdriver, remove the Top
Plastic Insert and the Bottom Plastic Insert from the
gate frame as shown.
Insertion Part
3/4" wide
Insertion Part
5/8" wide
2
Publicité
