Télécharger Imprimer la page

Nordmende Wegavision UHD 50 B Mode D'emploi page 60

Publicité

Les langues disponibles

Les langues disponibles

• Some HDMI cables do not have enough bandwidth to
carry high-bit-rate audio channels, use an HDMI cable
(HDMI High Speed Cables with
with eARC support
Ethernet and the new Ultra High Speed HDMI Cable
- check hdmi.org for latest info) .
• Set the Sound Output option in the Settings>Sound
menu to HDMI ARC. The eARC option in the Sound
menu will be enabled. Check to see if it is set to On.
If not, set it to On.
Note: eARC is supported only via the HDMI2 input.
System Audio Control
Allows an Audio Amplifier/Receiver to be used with
the TV. The volume can be controlled using the re-
mote control of the TV. To activate this feature set the
Sound Output option in the Settings>Sound menu
as HDMI ARC. When HDMI ARC option is selected,
CEC option will be set as Enabled automatically, if it
is not already set. The TV speakers will be muted and
the sound of the watched source will be provided from
the connected sound system.
Note: The audio device should support System Audio Control
feature.
Game Mode
You can set your TV to achieve lowest latency for
games. Go to Settings>Picture menu and set the
Mode option to Game. Game option will be available
when the TV's input source is set to HDMI. When set
the picture will be optimised for low latency.
Auto Low Latency Mode
You can also enable the ALLM (Auto Low Latency
Mode) option in the Settings>System>Device
Settings menu. If this function is enabled
automatically switches the picture mode to Game when
ALLM mode signal is received from the current HDMI
source. TV switches back to previous picture mode
setting when the ALLM signal is lost. So you won't
need to change the settings manually.
If the ALLM option is enabled, picture mode can not
be changed as long as ALLM signal is received from
the current HDMI source.
In order for the ALLM feature to be functional the related
HDMI source setting should be set to Enhanced. You can
change this setting from the Sources>Source Settings
menu or from the Settings>System>Sources menu.
the
TV
English - 17 -

Publicité

loading