Rapid EG340 Mode D'emploi page 4

ELECTRIC HOT MELT APPLICATOR: EG340
Operating instructions
Technical Characteristics
Dimensions (HxLxW)
Weight :
Working voltage :
Power rating :
Temperature :
Regulation :
Glue sticks:
Safety Instructions
Read safety rules and
instructions carefully before
using this machine.
WARNING : This tool must
be placed on its stand
when not in use.
• This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory and mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
• Do not use or store this machine
in a humid environment. Do not
place it where it may be splashed
by water. Do not expose it to
extreme changes in temperature
during or directly after use.
• Only use it indoors on a clean, dry
work surface. Excessive dust and
dirt may reduce lifetime of this
4
21 x 26,5 x 5 cm
0.7 kg
220V-240V~, 50Hz
220W
120-220°C
Thermostat
Rapid Ø 12mm
tool.
• Never unplug the machine by
pulling the cable.
• If the power cable is damaged
or cut, remove the plug from the
electric socket immediately and
do not use the machine. It must
be replaced by the manufacturer
or its service agent or a similar
qualified person in order to avoid
a hazard.
• Unplug the machine when not
in use, before any servicing
operations (maintenance,
cleaning etc.)
• Always verify that the appliance is
attached to a ground socket.
• When using an electric extension
cable, check that it is in good
working order and that it has a
ground socket.
• Never use the tool if it is damaged
in any way.
• Never insert objects other than
Ø12mm Rapid glue sticks into
the machine.
• Never remove a glue stick that
has already been inserted.
• It is normal for this tool to become
quite warm during use. This is
normal and does not indicate a
problem.
• Hot Surfaces: the nozzle of the
appliance and the glue can reach
a temperature of approx. 230°C.
Do not touch the heated nozzle
or the hot adhesive. Avoid any
contact with the skin. If you burn
yourself, put the burn in cold