Publicité
Les langues disponibles
Les langues disponibles
connecting the micro hi-fi system to an auxiliary source
The 3.5 mm jack allows you to connect an audio player and play music from this player on the micro
hi-fi system's speakers.
BASS
Cable
3.5 mm Jack/Jack
Plug the end of a 3.5 mm jack/3.5 mm jack cable (not included) into the socket
1.
unit.
Plug the other end into the audio output jack of your media player. Refer to the supplier's instruction
2.
manual for more information.
Select the LINE IN source by repeatedly pressing the
3.
remote control.
Start playback on your auxiliary source, the sound plays through your micro hi-fi system's speakers.
4.
44
44
TREBLE
on the front of the
button on the micro hi-fi system or the
maintenance and cleaning
Cleaning the unit
Unplug the unit from the power point before cleaning.
1.
Only clean the unit with a soft, dry cloth.
2.
Do not use any liquid cleaners or aerosols.
3.
Notes on CDs
HANDLING CDS
Hold the CD by the edges and make sure that your fi ngers do not
touch the playback surface. Do not glue paper or put stickers on CDs.
CLEANING CDS
Fingerprints and dust on a CD can cause poor sound quality
and distortion. Before playing, clean the CD with a clean, dry
cloth from the centre towards the edges.
Never use alcohol, benzene, thinner, cleaning fl uid or other
chemicals.
Do not use compressed air to clean dust.
STORING CDS
Store CDs in their cases after use.
Do not expose CDs to very cold, damp or hot environments.
Never leave them in a parked vehicle exposed to sunlight.
DAMAGED CDS AND CDS IN OTHER SHAPES
Do not use cracked, chipped, deformed, or otherwise damaged CDs as
they may damage the player.
This player is designed to only be used with standard, 100% circular CDs.
Do not use CDs in any other shape.
Never lift or move the unit during playback: CDs rotate at high speed and
could be damaged.
45
Publicité
