Philips 1000 Série Mode D'emploi page 15

shaving guard, it may take several weeks before
optimal shaving performance is restored.
- Remove the cutter from the shaving guard and
clean it with the brush.
- Clean the inside and outside of the shaving
guard with the brush.
5 Put the cutter back into the guard.
6 Put the shaving heads back into the shaving
unit.
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.
7 Put the retaining frame back into the shaving
1
unit and turn the lock clockwise.
2
8 Insert the lug of the shaving unit into the slot in
the top of the appliance. Then close the shaving
unit ('click').
Note: If the shaving unit does not close
smoothly, check if you have inserted the
shaving heads properly and if the retaining
frame is locked.
15
English