Publicité
Les langues disponibles
Les langues disponibles
1.
Set the frame upright. Place the steering wheel on the wheel fork at the desired height and secure
it with the Allen wrench.
2. Place the saddle on the frame at the desired height and tighten the fixing clamp.
3.
Remove the wheel axle plate from the wheel.
4.
Insert the gear pin into the wheel axle, then attach the wheel axle plate to the wheel. Make sure the
gear pin is pushed through the wheel axle plate.
5.
On both sides of the wheel, place a spacer on the gear pin. Place the wheel between the wheel
fork. Secure the wheel with the screw. Repeat steps 3 through 5 for the other wheel.
6.
Tighten the wheel screws with the Allen wrenches.
7.
The product is ready for use.
Make sure the steering wheel and saddle are properly mounted in the frame and
secure.
3.2 How to use
1.
Have the child sit on the saddle.
2. Make sure the child has both hands on the steering wheel. The steering wheel should always be
held while using the product.
3.
The product starts moving when the child starts walking while sitting on the saddle.
Please note that the product does not have a brake system.
20
Publicité
