Kenwood TTM020 Serie Mode D'emploi page 3

key
removable warming rack/toast rack
warming rack handle
Peek & View™ carriage lever
browning control
cancel button with indicator light
crumb tray
cord storage
to use your toaster
1 Plug the toaster into the power
supply.
2 Move the browning control to the
desired setting. Use a low setting
for light toasting and for thin or dry
bread.
3 Insert the bread, muffins, bagels etc.
4 Lower the lever until it locks
'cancel' button will illuminate. (The
lever will not stay down unless the
toaster is plugged in).
●
To toast frozen bread, move the
browning control to the defrost
position .
●
Use the carriage lever to lift the toast
to Peek & View™ at any time
without cancelling the toasting cycle.
●
To stop toasting during the cycle,
press the 'cancel' button, the toast
will pop up and the 'cancel' button
light will go off.
5 Your toast will pop up
automatically, to raise it higher, lift
the lever.
hints on using your
toaster
●
Select a lower setting for light
browning, for toasting one slice only
or for dry bread.
●
When toasting a single slice of
bread, you may notice a variation in
toast colour from one side to the
other - this is normal.
●
Dry/stale bread toasts more quickly
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
●
For best results ensure that the
bread slices are of an even
thickness, freshness and size.
●
In order to achieve uniform browning
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. Alternatively
select a lower setting when
additional toasting is carried out.
warming rack safety
. The
1 Never set the browning control
higher than 3 when using the
warming rack.
2 Never completely cover the warming
rack.
3 When using the warming rack, never
wrap the food up. Plastic wrapping
will melt and could catch fire. Foil will
reflect heat, damaging the toaster.
4 If you're using the toaster slots,
always remove the warming rack so
it can't burn you.
5 Always allow the warming rack to
cool before removing from the
toaster. Never place a hot warming
rack on a work surface.
6 Never touch hot surfaces, especially
the metal areas of the warming rack.
to use the warming rack
1 Place the warming rack on top of
toaster
2 Put your food on top of the rack
(slicing thick items in half will speed
up the warming process).
3 Set the browning control no higher
than 3 (
4 Lower the lever.
3
.
).