Tripp-Lite DWT3770X Manuel Du Propriétaire page 4

1a. Mount on Wood Stud Wall
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
14-04-253-93333F.indb 4
1
Find and mark the
exact location of
mounting holes
D6 Washer
Anchor Bolt
WARNING
4
2
3
Drill pilot holes
Screw the wall
plate onto the
wall
5/7/2014 1:50:03 PM