Publicité
Standard version (PSD),
DC emergency version (PSED)
N
L
D2
D1
8
26
N
L
D2
10 mm<Ø<14 mm
D1
!
The following versions of the luminaires should be positioned so that
prolonged staring into the luminaire at a distance closer than the indicated
value in the table is not expected!
All other standard luminaire types classified to Risk Group 1.
Inrush current
I mains (A)
I max
max/2
Tref
!
Ballproof certification according to VDE 0710-13.
The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE regulations or the national requirements.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or similar qualified
person in order to avoid hazard.
During the installation or maintaining the luminaire please use gloves to avoid spots on the cover
To remove dirt spots use the following:
Standard version (PSU)
N
L
I nom.
Time (us)
- Dust: use micro fiber cloths
- Fingerprints, etc. : use a cleaner for with antistatic properties.
2
1
5
LED250S, LED170S
Imax (A)
Tref (μs)
MCB
B-10 A
B-16 A
C-10 A
C-16 A
4/8
Tightening torque
4
4+1 Nm
Click!
Click!
3
LED130S,
PSU
LED350S
Electrical characteristics
11
5,1
15,3
63
2300
61
No. of luminaires max.
11
8
5
12
18
8
12
18
8
30
20
13
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
Publicité
