Télécharger Imprimer la page

Kokido BC Serie Manuel D'utilisation page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
EMPTYING THE FILTER BAG
CAUTION! Make sure the pool vacuum is OFF before cleaning the filter bag.
Washing regularly the filter bag helps to maintain a good suction and close contact
between the vacuum and the pool floor during the operation.
Place the cleaner on a flat surface. Press on the cord fastener to release the bag from the
main body. It is recommended to wash the filter bag with a water jet after each pool
cleaning cycle. To eliminate stubborn dirt or scum on a clogged filter, wash the filter bag
in a washing machine at 30 ˚C (86 ˚F) water temperature. If brushing is deemed necessary,
use only a soft brush to clean it carefully and gently to avoid any damages.
MAINTENANCE & STORAGE
NOTE:
1. Be sure to clean and dry the areas around the charging port and water sensors after
every use to avoid the forming of stains (byproduct of a natural chemical reaction
between electric current and water). Otherwise, the stains can be removed by light
scrubbing with a cotton bud soaked with juice of lemon or vinegar.
2. Battery discharges on its own during storage. Make sure to charge the pool vacuum
to about 30% to 50% of the battery capacity before it is stored.
3. You must recharge the battery at least once every three months when it is not in use.
 Unplug the external adaptor from the socket and the charging cable from the pool
vacuum .
 Detach accessories from the pool vacuum. If necessary, rinse the pool vacuum and
accessories with fresh water. DO NOT use aggressive detergent.
 Be sure to dry the pool vacuum before storage.
 Use a damp cloth to clean and dry the pool vacuum and its accessories.
 Store them in a well-ventilated area away from sunlight, heat, ignition sources, pool
chemicals, and from children. Ambient temperature for storage should be 10˚C – 25˚C
(50˚F – 77˚F). NOTE: A higher storage temperature may reduce the battery life.
WARNING!
Under no circumstances should you attempt to disassemble the main unit
and replace the impeller, motor, and battery by yourself.
CAUTION!
• Excessive heat can damage the battery and reduce the lifespan of your pool vacuum
as a result.
• Consult your dealer regarding battery replacement if the following happens:
-
Battery does not charge fully.
-
Battery operation time is noticeably reduced. Observe and record the run times
of the first few operations (on a full charge). Use these run times as a reference
point for comparison with run times in the future.
 The battery must be removed from the pool vacuum before it is scrapped.
 The battery is to be disposed safely in accordance with local ordinances or
regulations.
10/155

Publicité

loading

Ce manuel est également adapté pour:

Bc40