Publicité
Les langues disponibles
Les langues disponibles
1.4
general instructions
•
Prior to plugging your appliance into an electrical outlet, verify that the house circuit breakers for the outlet
are on.
•
The appliance may emit a slight, harmless odour when fi rst used. This odour is normal and it is caused by
the initial heating of internal appliance elements and will not occur again.
•
If your appliance does not emit heat when called for, consult the "operation" section of this manual for further
information.
•
Do not route the power cord directly underneath the appliance.
1.5
unpacking & testing appliance
Carefully remove the appliance from the box and remove the support brackets. Prior to installing the appliance,
remove all packaging material and test to make sure the appliance operates properly by plugging the power
supply cord into a conveniently located 220-240V, 10 Amp minimum dedicated grounded outlet.
1.6
rating plate information
This illustration is for reference only. Refer to the rating plate on the appliance for accurate information.
note:
The rating plate must remain with the appliance at all times. It must not be removed.
general information
W415-3032 / A / 10.29.21
EN
7
Publicité
