Publicité
Les langues disponibles
Les langues disponibles
POSITEC Inc. has established a partnership with the
RBRC Corporation to recycle any Positec batteries
with the RBRC-call2recycle seal. For environmental
protection, please do not discard batteries in the
trash. After the batteries' life cycle is ended, then
please call 1-800-822-8837 for a free service that
will properly dispose of the battery.
2.COMPONENT LIST
1.
1/2" FRICTION FIT SQUARE ANVIL
2.
FORWARD/REVERSE CONTROL
SWITCH
3.
BATTERY PACK *
4.
BATTERY PACK RELEASE BUTTON *
5.
SPEED CONTROL BUTTON
6.
ON/OFF TRIGGER
7.
LED LIGHT
8.
BATTERY LEVEL INDICATOR
* Not all the accessories illustrated or described
are included in standard delivery.
3.TECHNICAL DATA
Type WX276L WX276L.X (2 - designation of
machinery, representative of Impact Wrench)
Rated voltage
bs
Breakaway Torque
Fastening Torque
No-load speed
Impact rate
Machine weight (bare
tool)
**X may be followed by one or two characters. All
20V Brushless High Torque 1/2" Impact Wrench
Auto stop
WX276L WX276L.X**
20V
Max***
1400 ft.lbs
1000 ft.lbs
0-900/1100/1900/min
0-1000/1600/2000/min
7.3 lbs (3.3 kg)
models are the same except model number and
trademark.The suffix in models may be number from
"1" to "999" or English letter "A" to "Z" or "M1" to" M9"
which means different package or the various of
accessories packed in the package.
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category
Model
20V Battery
WA3675
20V Charger
WA3881
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
4.INTENDED USE
This tool is intended for the fastening and loosening
of bolts, nuts and various threaded fasteners. This
tool is not intended for use as a drill.
5.OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY AND OPERATION
ACTION
BEFORE OPERATION
Charging the Battery
Installing the Battery Pack
Removing the Battery Pack
Checking the battery condition
NOTE: Fig. A4 only applies for the
battery pack with battery indicator
light.
ASSEMBLY
Capacity
5.0 Ah
2.0 A
9
FIGURE
See Fig. A1
See Fig. A2
See Fig. A3
See Fig. A4
EN
Publicité
