Use Instructions; Transport Handle - PANDROL HC355 Notice D'utilisation Et D'entretien

Keep dry !
Expose the rail saw in the rain can result in engine ignition problem.
longer than two weeks, the fuel tank must be emptied by running the engine out of gas
A rail saw in order to work weighs
Only one person can handle the rail saw
by mean of the transport handle.
3 - Safety measures to be taken before initial use
- Read carefully the manuals delivered with the machine
- The operator must ensure of the Railway Network particular use and security conditions
- Check the good functioning of the safety device witch interrupt the engine ignition when the rail saw is
disconnected from the support arm.
Procedure : rail saw fitted on the support arm, engine on idle speed, loosen the connecting screw :
engine must stop running.
- Check petrol level
- Imperatively use
A TWO STROKE ENGINE MIXTURE
refer to the prescriptions mentioned in the booklet of the engine manufacturer.
HC 355 & HC406 HUSQVARNA K1270R - 42121010– 01/2019
IV – USE INSTRUCTIONS
1 - Storing
2 – Handling
21 Kg
; for the petrol type, the oil type and the petrol / oil ratio
– R01 Page
25
For a storage
transport
handle
Transport
handle