Gescasi Remock CODE Manuel De L'utilisateur page 6

1. Parts and installation
Mounting holes
You can install the device by using two screw holes shown on the above. If the device will be used in a secure place like an
office in a secured building, it can be placed easily by using 2-way stickers provided with the product.
2. General information and warnings
•
If there is any problem with door and locking mechanism, first of all, those problems needs to be
solved. Otherwise, there would be problems during operating the device.
•
If there is a problem with the device, contact your dealer.
•
Replace the batteries, if there is a battery warning.
• It needs to be protected from water and direct sunlight.
•
Do not touch to electronic parts of the device with a conducting metal or sharp object.
•
Do not use water or corrosive chemicals to clean the device.
3. Keypad menu
•
"7" Password
•
"0" OTP
•
"lock" Language
4. Administration actions/settings for keypad
•
Two different 5-digit password may be defined to the keypad, 1 master, 1 user. Both of the
passwords can be used to unlock and open. For settings, the master password need to be entered.
Default master password is "12345" User password is not set.
WARNING: First of all, change the default master password.
5. Changing default master password
•
Tap with your Palm to wake up device. Then touch the "SETTINGS" button 2 times. "MASTER" will
be displayed on the screen.
•
Enter "12345" as the default password "##" symbol will appear on the screen.
•
Touch the "7" button. "PASSWORD" will appear on the screen, touch the "SETTINGS" button to
enter menu.
•
When the "MASTER" appears, touch the "SETTINGS" button again.
•
Enter your new 5-digit master password when "NEW PASS" is displayed on the screen. When
"REPEAT" is displayed, re-enter the 5-digit password. Thus your master will be changed.
Display
Touch button
Lock button
Settings button
Screw for changing
batteries