Be Cool Twister Mode D'emploi page 57

To retract the support leg, repeat the above prescribed
procedures in reverse order.
But rstly you should pull the rotation handle orward
and at the same time hold and push the support
leg backward to the bottom o the base, then release
the rotation handle as the following photos:
1.7 Usage of the ISOFIX
Warning: Ensure that your vehicle has ISOFIX ancho-
rage points. Insert ISOFIX guides to assist with
installation.
1. Place the child seat forwarder facing on a vehicle
seat.
2. Press and push ISOFIX release button on both sides
o the seat and make the ISOFIX connectors are ully
extended. This ensures that both hooks on the ISOFIX
connectors are open and ready to use, now both
ISOFIX indicators of ISOFIX release button show red
color.
3. Push the ISOFIX connectors through ISOFIX guides
directly into the anchorages until heard an audible
sound "click". Now both ISOFIX indicator o ISOFIX
1.6.4 release button show green color . At the same time,
push the backrest o the base o the enhanced child
seat as soon as possible toward the backrest o vehicle
seat until tightly.
Make sure that both ISOFIX indicators o ISOFIX
release button on both sides show green color so that
the enhanced child seat is correctly fastened.
4. Shake the enhanced child seat to ensure that it is
securely astened and check the saety buttons to
make sure that the two indicators are ully green.
To disassemble the ISOFIX , repeat the above pres-
cribed procedures in reverse order.
EN
57