Publicité
Les langues disponibles
Les langues disponibles
2
appliance description
1.
Freezer drawer
2.
Door
3.
Thermostat (behind bottom drawer)
4.
Adjustable feet
3
before the first use
Before using the appliance for the first time, you should proceed as follows: carefully unpack the appliance and remove
all packaging material and any promotional stickers. Keep the packaging (plastic bags, polystyrene and cardboard) out of
the reach of children. After unpacking the appliance, carefully check it for external damage that may have occurred during
transport. Place the appliance on a sturdy, flat surface and make sure there is enough space all around for sufficient ventila-
tion. A minimum space of 10 cm is required between the appliance and the surrounding walls. In this way the appliance is
able to release heat properly, cool well and function in an energy efficient way.
• You can use the adjustable feet to the left and right to level
the appliance.
• Turn the adjustable feet clockwise to raise the appliance.
• Turn the adjustable feet counter-clockwise to lower the ap-
pliance.
Do not place the appliance near heat sources such as central heating or a stove. Do take note of the climate class of the
appliance. When placed in a room that is too cold, the refrigerator will not function properly.
After placing the appliance, leave it for at least 3 hours before inserting the plug in the socket.
First clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or
soda. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry. Leave the appliance
to dry for 1 to 2 hours.
1
4
L
3
H
2
17
English
•
Publicité
