Guardian Technologies pure guardian H940 Instructions D'utilisation Et D'entretien page 3

pRODUCT SpECIFICATIONS AND pARTS
SpECIFICATIONS
MODEL NUMbER: H940
HUMIDIFYING MODE: Ultrasonic Cool Mist
INpUT VOLTAGE: AC120; 60Hz
pOWER CONSUMpTION: 30W
TANk CApACITY: 0.5 gallons
SUCCESSIVE HUMIDITY HOURS: Up to approximately 30 hours between tank
refills on low setting
DIMENSIONS: 7.32"L x 7.32"W x 15.35"H
WEIGHT: 2 lbs.
pARTS
Mist Director
Tank
body
power button/Mist
Control/Refill
Indicator LED
Cleaning brush
*Brush is packaged
separately from unit in box.
E-4
Night Light
Cap
Tank Lid
Night Light
Night Light Cleaning brush
Storage
Night Light Control
Ultrasonic
Disk
SET Up
Select a firm, level, flat location - at least six inches (15 cm) from any wall or object for proper air
flow. Place the humidifier on a water-resistant surface, as water can damage furniture and some
flooring. Do not place unit directly on carpet, towels, blankets or other absorbent surfaces.
Guardian Technologies will not accept responsibility for damage caused by water spillage.
FILLING
Make sure unit is unplugged.
1. Separate the tank from the base of the unit.
2. Flip over water tank and open the
tank lid, turning it to the left.
4. Close the tank lid, turning it to the right.
It is important to FIRMLY secure cap after
filling the tank with water.
Dry Air
Exhaust
6. power button
Before turning on make sure there is water in
the unit. Turn the Power Button.
NOTE: If you live in a hard-water area, we recommend the use of distilled water for your
humidifier. This will help reduce the precipitation of minerals or 'white dust'.
DIRECTIONS FOR USE
3. Pour cool, clean water directly into the tank. Do
not pour anything but water into the tank.
5. Attach the tank to the base of the
unit by aligning night light (in base)
with night light cap (in tank). Plug in.
E-5