Publicité
Les langues disponibles
Les langues disponibles
M1.1.LA2800-LA2801-LA2802.NLFREN - 12062020
EN
2.1 DESCRIPTION AND OPERATION
2 Description
The fume extractor is designed to provide high efficiency filtration of fume generated during welding processes.
The fume extractor is designed to provide high efficiency filtration of fume generated during welding processes. Contaminants
contaminants are captured at the source through the extraction arm hood, clean air is then recirculated back to the
are captured at the source through the extraction arm hood, clean air is then recirculated back to the working area. Figure 1
working area. figure 1 illustrates the basic operation and identifies the key components of the system.
illustrates the basic operation and identifies the key components of the system.
When the pressure drop remains consistently above 4 ̋ , or the generated airflow can no longer suitable capture the weld
When the pressure drop remains consistently, or the generated airflow can no longer suitable capture the weld fume, the filter
should be replaced.
fume, the filter should be replaced.
Figure 1 Description
FIGURE 1 General Product Operation
3 Technical specifications
Model
Number of suction arms
Length x diameter of arm
Power supply
Power
Air flow
Sound level
Dimensions (l x w x h) (without arm)
Net weight
Protection class
4 Installation
The fume extractor is portable system that can be configured with multiple accessories to serve various application requirements.
Please refer to the proper section when installing your system.
4.1 Equipment off loading and inspection
Upon receipt of your unit, visually inspect for any shipping damage. A damaged carton indicates that the equipment may have
received rough handling during shipping that may have caused internal damage which could cause your system to not function
properly. Notify your delivery carrier and enter a claim if any damage is found.
It is recommended to leave the unit secured to the shipping skid if the use of a skid loader or fork truck is required to deliver the
unit to the point of delivery or installation. It is not recommended to pick the fume extractor up with a fork truck after it has been
removed from the skid.
LA2800
LA2801
0
1
-
3000 x 150 mm
400 V / 50 Hz
2.2 kW
2800 m³/h
70 dB(A)
700 x 650 x 1280 mm
105 kg
115 kg
IP54
11
LA2802
2
125 kg
Publicité
