Connections - Panasonic KX-HNA101C Guide D'installation

desired usage area is suitable to
proper operation.

Connections

Firmly insert the smart plug (
into the power outlet.
Firmly insert the AC plug of the
desired electric device (
the smart plug.
A
Note:
R You can turn the power supplied to
the smart plug's power outlet on and
off by pressing M N.
R When connecting a device with a
large AC plug, use a short extension
cord so that the AC plug of the
connected device does not block the
LED indicator/M N.
For assistance, visit www.panasonic.ca/english/support
HNA101C̲(en̲en)̲0916̲ver.022.pdf 7
2
1 2 1
Note about connections
R The smart plug should be connected
to a vertically oriented or
floor-mounted AC outlet. Do not
connect the smart plug to a
ceiling-mounted AC outlet, as the
)
1
weight of the smart plug may cause
it to become disconnected.
R If the electric device connected to
) into
the smart plug draws more than
10 A or 1,200 W of power, the smart
plug will turn off automatically.
R In the event of a power failure, the
smart plug may not turn back on
after power is restored. For this
reason, connecting refrigerators or
other devices that require constant
power supply should not be
B
connected to the smart plug.
R After connecting an electric device
to the smart plug, make sure the
smart plug is firmly connected to the
power outlet.
2
Setup
7
2014/09/16 20:47:46